Craftmade TCS Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Controles remotos Craftmade TCS. Installation Sheet Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 14
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Installation Instructions
Instrucciones de instalación
Instructions d’installation
BL52
Bloom Ceiling Fan
Vista de pagina 0
1 2 3 4 5 6 ... 13 14

Indice de contenidos

Pagina 1 - Bloom Ceiling Fan

Installation InstructionsInstrucciones de instalaciónInstructions d’installationBL52Bloom Ceiling Fan

Pagina 2 - Trouble Shooting

Lift fan onto the mounting bracket (#1). Turn housing until hanging ball seats itself into ball socket (listen for click).WARNING: To reduce the risk

Pagina 3 - What You Have

White (Neutral)GroundWhiteBlackWireConnectors (S6)Ground(Green)Blue Black (Power)Outlet BoxGround (Green)Downrod Ground(Green)Mounting BracketGround (

Pagina 4

Attach canopy (3) to the mounting bracket by placing screws (S2) into slot in canopy. Twist clockwise to lock into place. Seat the canopy screw cover

Pagina 5

Slide the small pedal blades into place, support andattach with screws. (S4)Screw in candelabra light bulbs. (not included)Place light kit glass over

Pagina 6

ON/OFF For emergency shut off.HIGH Controls fan motor speed. To select desired speed, press MEDIUM button once and release.LOW REVERSE Controls

Pagina 7

Trouble ShootingProblem A: Fan Will not Start Remedies: 1. Check fuse or circuit breaker and replace if necessary 2. Turn off electrical power

Pagina 8

Before Assembly1. Make sure that the fan voltage (120) is compatible with your own electrical system.2. Check to make sure that your c

Pagina 9

Turn off circuit breakers and wall switch to the fan supply line leads. 30”84”IMPORTANT: If using the angle mount method, check to make sure the ceilin

Pagina 10

OUTLET BOXOutlet Box (A)Mounting Bracket (1)Bracket Screws & Washers (S3)Support BeamWood Screws (S1)Canopy Screws (S2)CeilingWood Screws (S1)“J”

Pagina 11

Unscrew and remove motor housing washer and motor housing top plate. Attach Large Pedal Blades from Top of Motor Housing.5

Pagina 12

Reattach the Motor housing Plate and Motor Housing Washer as shown.Make sure the antenna wire is threaded through hole on top of motor housing.Downrod

Pagina 13

Tighten set screw (A) against downrod.Insert safety bolt (S7) through flange & downrod and attach nut. Tighten firmly.read the downrod onto the mot

Pagina 14

Place flange cover (4) over downrod assem-bly. Attach antenna wire to flange cover. Place canopy screw cover over downrod. Place canopy (3) over downro

Comentarios a estos manuales

Sin comentarios